鋁型材光伏支架主要使用于分布式屋頂光伏電站。

品名：鋁導軌

　　規格：多種規格(可以根據客戶要求定制尺寸)

　　長度：多種規格(可以根據客戶要求定制尺寸)

　　材質：鋁合金6063-T5

　　表面處理：陽極氧化

優點為：　

（a）安裝鋁型材支架不生銹、外表美觀且輕便易安裝。

（b）抗自然腐蝕：放置在空氣的鋁能夠在表層形成致密的氧化鋁保護層，這一保護層能防止鋁材的進一步氧化。

　　（c）抗電偶腐蝕：鋼鐵支架與鋁制光伏板框架接觸時，鋁制光伏板框容易發生電偶腐蝕，而鋁材支架則避免了這一現象。

　　（d）平衡電壓：鋁材擁有優良的導電性，因此能夠更好地傳導光伏支架系統中因各種原因所產生的弱電流。

（e）耐低溫：普通鋼鐵尤其是焊接區域在低溫環境中脆弱易碎，而鋁材的強度則反而增加。

Aluminum alloy bracket

The aluminum profile photovoltaic scaffold is mainly used in the distributed rooftop photovoltaic power station.

Name: aluminum guide

Specifications: a variety of specifications (can be customized according to customer requirements)

Length: a variety of specifications (can be customized according to customer requirements)

Material: aluminum alloy 6063-T5

Surface treatment: Anodizing

The advantages are:

(a) the installation of aluminum profile support is not rusty, beautiful appearance and easy to install.

(b) resistance to natural corrosion: the aluminum in the air can form a dense layer of alumina protection layer on the surface, which prevents further oxidation of the aluminum.

(c) anti galvanic corrosion: when the steel bracket contacts with the frame of the aluminum photovoltaic panel, the aluminum PV frame is easy to produce galvanic corrosion, while the aluminum stent avoids this phenomenon.

(d) balance voltage: aluminum has excellent conductivity, so it can better conduct the weak current caused by various reasons in the photovoltaic support system.

(E) low temperature resistance: the ordinary steel, especially the welding area, is fragile and fragile in the low temperature environment, while the strength of the aluminum material increases.

C型鋼支架

   C型鋼光伏支架主要使用于分布式平面屋頂光伏電站及地面電站上。

品名：熱鍍鋅C型鋼

　　規格：多種規格(可以根據客戶要求定制尺寸)

　　長度：多種規格(可以根據客戶要求定制尺寸)

　　材質：Q235

表面處理：熱鍍鋅

優點：

（a）安裝系統、靈活多變的組合，具有極佳的通用性。且系統滿足多種方式的安裝，可方便地進行后補安裝。 

（b）一個系統、一次施工、一步到位的裝配式施工整齊、美觀、大方。

（c）具有超凡的承載力，受力穩定，使用壽命長。

（d）C型鋼卷邊帶有鋸齒，可有效抗剪、止滑、抗沖擊；且條形安裝孔外觀美觀，靈活方便。

（e）連接件通用性強，適合各種應用，簡便快捷，二、三和四維高強應用；預組合實現快速安裝，提供可靠的鎖鍵連接，強度高。

C steel support

The C type steel photovoltaic scaffold is mainly used in the distributed flat roof photovoltaic power station and the ground power station.

Name: hot-dip galvanized C steel

Specifications: a variety of specifications (can be customized according to customer requirements)

Length: a variety of specifications (can be customized according to customer requirements)

Material: Q235

Surface treatment: hot-dip galvanizing

Advantage：

(a) installation system, flexible and changeable combination, with excellent versatility. And the system meets a variety of ways of installation, and can be easily repaired after the installation.

(b) a system, a construction, one step of the assembly construction is neat, beautiful and generous.

(c) has the supernatural bearing capacity, the force is stable, the service life is long.

(d) C steel coil with sawtooth, can effectively resist shearing, skid, impact resistance; and the bar - shaped installation hole is beautiful, flexible and convenient.

(E) connections is universal, suitable for a variety of applications, simple and fast, and two or three high strength four application; pre assembly to achieve rapid installation, reliable locking connection, high strength.